50LSQT1210Recording≥ During normal playback, the image movementmay not look smooth.≥ Avoid recording under fluorescent light,mercury light or sodium light because thecolour and brightness of the playback imagemay change.≥ If you record a subject illuminated with stronglight or a highly reflective subject, vertical linesof light may appear.≥ If the brightness is insufficient, the sports modedoes not function. The [5] display flashes.≥ If this mode is used indoors, the screen mayflicker.Portrait mode≥ If this mode is used indoors, the screen mayflicker. If so, change the scene mode setting to[OFF].Low light mode≥ Extremely dark scenes may not be able to berecorded finely.Spotlight mode≥ If the recording subject is extremely bright, therecorded image may become whitish and theperiphery of the recorded image extremelydark.Surf & snow mode≥ If the subject is extremely bright, the recordedimage may become whitish.[HDD] [SD]If auto focusing is difficult due to the conditions,then manual focusing is available.¬ Rotate the mode dial to select or.1 Set the AUTO/MANUAL/FOCUSswitch to MANUAL.2 Move the switch down and set itto FOCUS position.The manual focus indication [MF] and the iconshown in the illustration appear.3 Move the joystick left or right tobring the subject into focus.≥ The subject may not be in focus when zoomedin if focusing with a wide angle. First, zoom inon the subject, and then focus on it.To restore to the automatic adjustmentPress the AUTO/MANUAL/FOCUS switch downagain to the FOCUS position.≥ You can also restore the auto focusing bysetting the AUTO/MANUAL/FOCUS switch toAUTO.[HDD] [SD]The automatic white balance function may notreproduce natural colours depending on thescenes or lighting conditions. If so, you canadjust the white balance manually.¬ Rotate the mode dial to select or.Manual focus adjustmentWhite balanceThis is for recording in naturalcolours.MNL4/44/4 NEXTNEXT4/4 NEXTMNL4/44/4 NEXTNEXT4/4 NEXTLSQT1210_EP(EN).book 50 ページ 2007年2月9日 金曜日 午後6時0分