69LSQT1210HDD and card managementHDD and card managementHDD management[HDD]Please be aware that if the HDD is formatted,then all the data recorded on the HDD will beerased. Store important data on a computer, etc.¬ Rotate the mode dial to select .¬ Select [HDD] in [MEDIA SELECT].1 Press the MENU button, thenselect [SETUP] #[FORMAT HDD] # [YES] andpress the joystick.2 When the confirmation messageappears, select [YES], then pressthe joystick.≥ When formatting is complete, press the MENUbutton to exit the message screen.≥ During formatting, do not turn this unit off.≥ When you format the HDD, use a battery withsufficient battery power or the AC adaptor.≥ During formatting, do not cause any vibrationsor impacts to this unit.[HDD]Information concerning the space used andremaining on the HDD is displayed.¬ Rotate the mode dial to select .¬ Select [HDD] in [MEDIA SELECT].Press the MENU button, then select[SETUP] # [HDD STATUS] # [YES]and press the joystick.To exit the information screenPress the MENU button.≥ The 30 GB hard drive utilizes a portion of thestorage space for formatting, file managementand other purposes. 30 GB is 30,000,000,000bytes. Usable capacity will be less.Card management[SD]Please be aware that if an SD card is formatted,then all the data recorded on the card will beerased. Store important data on a computer, etc.¬ Select [SD CARD] in [MEDIASELECT].1 Press the MENU button, thenselect [SETUP] #[FORMAT CARD] # [YES] andpress the joystick.Formatting HDDThis is for initializing HDD.Displaying HDD informationMENUFormatting an SD cardThis is for initializing cards.MENUMENULSQT1210_EP(EN).book 69 ページ 2007年2月9日 金曜日 午後6時0分