Section 700 - Operation Chapter 4. Key Telephone FeaturesDBS-2.3/9.2-700 DBS Manual - Revised April 2000 4-61DSS/BLF Appearances(CPC-AII and CPC-B Version 2.0 or higher)DescriptionWhen a DSS/BLF key is programmed, it automatically provides direct stationselection and busy lamp field for the assigned extension number. If desired,the DSS/BLF key can also provide ring monitor.For example, you can set extension A as a DSS/BLF key on extension B.When extension A rings, the LED of the DSS/BLF key on extension Bflashes. If extension B answers the call by pressing the DSS/BLF key, theLED on extension A goes off and the call remains only on the DSS/BLF keyof extension B.Ringing can be set on either one or both extensions. If the extensions are notset for ringing, the LED of the DSS/BLF key will flash red. If the extensionsare set for ringing, the LED will flash green.When extension A is in use, the LED of the DSS/BLF key on extension B willlight red. If one extension has the Absence Message, Call Forwarding, or Do-Not-Disturb feature activated, the DSS/BLF key will light green.OperationTo assign a DSS/BLF key:1. Press the PROG key.2. Press the FF key you want to assign the DSS/BLF appearance to.3. Dial the extension number.4. Press the HOLD key.To make an intercom call using the DSS/BLF key:Press the idle DSS/BLF key.To pick up a call on a DSS/BLF key:Press the flashing DSS/BLF key.
