Section 700 - Operation Chapter 3. System FeaturesDBS-2.3/9.2-700 DBS Manual - Revised April 2000 Page 3-15Considerations• Caller ID service must be ordered from the local telephone operatingcompany or the interexchange carrier.Caller ID Auto DISA(CPC-A II Version 6.1 or higher and CPC-B Version 6.1 or higher)DescriptionA DBS equipped for Caller ID (CID) can provide automatic DISA dial tonebased on Caller ID information. This allows up to 10 predetermined users toaccess the DISA feature without requiring a trunk be left in the DISA mode.When a CID call is sent to the DBS, the CID number is checked against thetable. If the number is found, the caller will automatically be connected toDISA dial tone.Related Programming• FF1 (System Programming): Automatic DISAHardware Requirements• Loop-start trunk card (VB-43511A)• Caller ID circuit card (VB-43511)• MFR card (Caller ID Auto DISA)Considerations• Caller ID feature must be enabled.
