Chapter 4. Key Telephone Features Section 700 - Operation4-92 DBS Manual - Revised April 2000 DBS-2.3/9.2-700System Speed DialDescriptionFrequently called numbers can be stored using the System Speed Dial feature.System Speed Dial numbers are programmed from the Attendant Phone andcan be used by any extension. With all versions, up to 90 System Speed DialNumbers can be stored. Beginning with CPC-AII and CPC-B Version 7.0 andhigher, up to 200 System Speed Dial numbers can be stored when the SpeedDial Add-on mode is selected.For information on assigning System Speed Dials see “Attendant Assignmentof Speed Dialing” on page 2-3.OperationTo use a programmed System Speed Dial key:1. Press an unlit line key.• The phone issues outside dial tone.• The line LED lights green.• “CO TALK #XX” (where “XX” is the line number) appears on thedisplay.2. Press the AUTO key.“A” appears on the display.3. Enter the System Speed Dial code (00-89 or 000-199).The number and corresponding name appear on the display.4. Complete your call and replace the handset.The line LED changes from green to red and then goes off.To check a programmed System Speed Dial key:1. Press the ON/OFF key.• The phone issues intercom dial tone.• The ON/OFF LED lights.
