Chapter 6. SLT Features Section 700 - Operation6-14 DBS Manual - Revised April 2000 DBS-2.3/9.2-700Considerations• If more than one call is arriving at the Paging Group, the Group CallPickup feature will answer the call to the lowest port number first.• If the called extension belongs to more than one Paging Group, the GroupCall Pickup Feature will answer the call to the lowest-numbered PagingGroup first.• You can answer incoming calls, Intercom Tone Calling, or Intercom VoiceCalling using the Group Call Pickup feature.• Group Call Pickup cannot be used to pick up a ringing phone in PagingGroup 00. For example, if an extension is a member of Paging Groups 00and 06, the extension can use Group Call Pickup to answer ringing calls inGroup 06, but not in Group 00.Call Transfer(All Versions)The DBS provides two call transfer methods: blind transfer and screenedtransfer.With CPC-A and CPC-B Versions prior to 2.0, SLTs can only transfer trunkcalls. Beginning with CPC-B Version 2.0, SLTs can transfer trunk andintercom calls.Blind TransferDescriptionBlind transfer allows the transfer of a call directly to an extension, withoutwaiting for the called extension to answer.Operation1. Flash the switchhook to place the call on hold.2. Dial the number of the extension to which the call is to be transferred.3. Replace the handset before the other party answers.• You can also replace the handset after the third party answers.
