Section 700 - Operation Chapter 2. Attendant FeaturesDBS-2.3/9.2-700 DBS Manual - Revised April 2000 2-5OperationTo override a busy extension:Press “4.”“CONF XXX YYY” (where “XXX” and “YYY” are the extension numbers)appears on the display.Related Programming• FF1 (System): Attendant Override• FF1 (System): Alert Tone for Busy Override & OHVAConsiderations• Replace the handset to exit the three-party conference call.• The alert tone can be turned on or off through system programming.Attendant Call Park(All Versions)DescriptionUsing the Attendant Call Park feature, the Attendant may park an outside calluntil the called party can be found. The attendant can then use the Pagingfeature to inform the called party of the call’s Park Number. The parked callcan then be retrieved from any extension by dialing the Park Number.The attendant phone is equipped with ten outside line Park Numbers (00-09).Programming a Call Park key into an FF key on a telephone or a DSS consolemakes one-touch Call Park possible.OperationTo park an outside call:1. Press the HOLD key.
