Chapter 5. DSLT Features Section 700 - Operation5-16 DBS Manual - Revised April 2000 DBS-2.3/9.2-700Call Transfer(All Versions)The DBS provides two call transfer methods: blind transfer and screenedtransfer.Blind TransferDescriptionBlind transfer allows the transfer of a call directly to an extension, withoutwaiting for the called extension to answer.Operation1. Press the HOLD key to place the call on hold.2. Dial the extension number to which the call is to be transferred.3. Replace the handset before the other party answers.• You can also replace the handset after the third party answers.• The third party need only pick up the handset to speak to the outsideline.Related Programming• FF1 (System): Onhook (Automatic) Transfer• FF1 (System): Recall Timer for Extension-Transferred CO Calls• FF1 (System): Recall Timer for Attendant-Transferred CO CallsConsiderations• For users to transfer calls by pressing HOLD, dialing an extension, andgoing onhook, the Onhook Transfer feature must be enabled.• You cannot transfer a call to an extension that has Do Not Disturb orAbsence Message activated.• You can transfer a call to an extension that has Call Forwarding activated.The transferred call will follow the call forwarding path of the extension itis transferred to.
