Appendix A. EX 1.0 Feature Update Section 700-OperationPage A-18 DBS Manual - Revised April 2000 DBS-2.3/9.2-700the analog device will automatically default to “1 second ON, 3 secondsOFF.”Ring Patterns Not Applicable to Analog Device. The following ringpattern addresses will not affect the analog device:Analog Transfer Ring Pattern FF1 2# 1# 31# (0-6)#SLT DISA Ring Pattern FF1 2# 1# 34# (0 or 1)#Inbound Ring Pattern FF2 (Trunk)# 17# (0-9)#Flash Interaction. Any disconnect signal sent to the analog port must begreater than the SLT Flash Control; otherwise the disconnect signal will beinterpreted as a flash and the call will be placed on hold.Programming Addresses That Affect the Analog Device. The followingaddresses will control the analog device, but will not affect the digital keytelephone:AEC Disconnect Duration FF1 2# 1# 35# (0-15)#SLT Flash Control FF1 2# 1# 11# (0 or 1)#SLT Onhook Flash Timer FF1 3# 14# (0-6)#AEC Disconnect FF3 (ExtPort)# 46# (0or 1)#Analog Port on Large-Display Phone FF3 (ExtPort)# 51# (0or 1)#Data Security on Analog Port FF3 (ExtPort)# 52# (0or 1)#MSG (Message) KeyDescription The MSG key on the VB-44225 Large-Display Phone adds the followingfunctionality to the phone:• Auto-Callback. If a callback message has been left by anotherextension, you can press the MSG key to place an automatic callback tothe extension that sent the message. If more than one callback messagehas been received, pressing the MSG key will perform auto-callback inthe order received.• Auto-Answer Voice Message. You can press the MSG key toautomatically access your voice mailbox. The phone will dial yourvoice mailbox and send access codes (if programmed) for retrievingmessages.Programming See Section 400 - Programming (Appendix C) for more detailedprogramming information.
