EnglishVQT0K981053Designating Scenes to Be Printed (DPOF)You can use DPOF to set print information, including selection of the scenes to be printed, so that you willbe able to use it on a system conforming to DPOF.Note :DPOF stands for digital print order format. DPOF is used to ask a print lab to print recorded stills.1 Set the power switch to “ ”.2 Press the DISC NAVIGATION button.3 Select the scene to which DPOF is to be set.4 Press the MENU button.5 Choose “DPOF” on the“Scene” menu screen,and then press the Abutton.6 The “DPOF Set” screen will appear: If you aresure you want to set DPOF to the scene, pressthe A button.If you want to change the scene to which DPOFis set, you can change it on this screen.7 Use joystick to specify thenumber of prints, andthen press the Abutton:Tilt it up or to right: Toincrease the number oneby one.Tilt it down or to left: To decrease the number oneby one.After setting, the “DPOF Set” screen will berestored.Repeat steps 6 and 7 to set DPOF to another still.8 Press the C button to quit.Note :• If you press the MENU button before pressing the Abutton in step 6, the submenu screen will appear (P.97).• You can also select multiple photos (P.93).• If you specify the number after selecting multiple stills, thesame specified number will be set to all those stills.• Up to 99 prints can be set for one scene. The maximumnumber of settable prints on one card is 999.• This DVD Video Camera may not recognise DPOF thathas been set on another device: Always set the DPOF onthis DVD Video Camera.S c e n eENTER RETURNSe l e c tDe t a i lL o c kDe l e t eDPOF7 / 19DPOF Se tENTER EXIT6DPOF icon7 / 19DPOF Se tENTER EX I T3273