EnglishVQT0K98145Trouble MessagesA message may appear while you are operating the DVD Video Camera. If a message appears, refer tothe following table and take appropriate corrective action.Message Cause & Troubleshooting Referencepage(1) Data error in a part ofimage file. Repair datanow?(2) Found error in imagefile. Repair data now?(3) Data error in allimage file. Repair alldata now?It is possible that the system cannot normally complete writing of filewhen power is turned off for some reason during recording orediting (deleting, dividing or combining scenes, or creating play list).Selecting “YES” will automatically repair the video file, but even if“NO” is selected, the same message will appear when the DVDVideo Camera is turned on next time. (Do not remove the disc whilethe DVD Video Camera is recognising it: Ignoring this will deactivatethe file repair function.)Follow the instructions on screen, taking note of the followingcautions:• Data may not be repaired, depending on the timing when powerwas turned off.• Data may not be repaired normally if data recorded on anotherrecorder is mixed in.• The repaired data may be different from the original recordedcontent because of partial deletion of defective portion.• Since the date/time for repair is added to the repaired data (onlythe corrected portion for partial repair), the original date/timeinformation will be lost.• Since all movies, and then all stills, are repaired, the order ofrecorded contents will be lost.(In case of message (2) (3) only)• See *1 on page 152.(1) Error has occurred.Please restart.• Error has occurred. Try to restart the DVD Video Camera usingthe following methods:(1) Turn power off, remove the battery or AC adaptor/charger andreattach it, and then turn power on again.(2) Turn power off, and reinsert the disc. Then turn power onagain.(3) See *3 on page 152.(4) If you have another disc available, check to see if any problemoccurs with the disc. If another disc can be used normally, theoriginal disc may be defective: Contact the disc manufacturer.If the above procedures cannot solve the problem, take noteof the error number, and contact your dealer.Reference: “Error Code 2881” shows that the disc cannot berecognized properly.6, 40, 43, 44(2) Error has occurred.Please reinsert a disc.(3) Error has occurred.Error code No. xxxx.Please read the manual.(4) ERROR xxxx313
