EnglishVQT0K98141With Windows® 2000 Professional/XP Home Edition/XP Professional:1 Set the power switch on DVD Video Camera to“ ”, and use the USB cable to connect it to thePC.2 Open “System” on “Control Panel”, and thenclick “Device Manager” under the “Hardware”tab.3 Delete “MATSHITA DVD-CAMERA M5070 USBDevice” in “DVD/CD-ROM drive”.4 If your PC uses Windows ® 2000 Professional,delete “MATSHITA DVD-CAMERA M5070 USBDevice” in “Disk drives”.If your PC uses Windows ® XP Home Edition/XPProfessional or no item exists, proceed with thenext step.5 Delete “Panasonic DVD CAMERA DVD ModeUSB Interface” in “Universal Serial Buscontrollers”.If no item exists, proceed with the next step.6 Close Device Manager.If the message for restart appears, click “No”.7 If your PC uses Windows ® 2000 Professional,open the C:\WINNT\INF folder.If your PC uses Windows ® XP Home Edition/XPProfessional, open the C:\WINDOWS\INFfolder.If INF folder cannot be found, use Explorer tochoose “Tools” menu, “Folder Options”, “View”tab, and then “Show all files and folders”: Click“OK” and then try again.8 Use application software “Notepad” providedwith Windows ® to open the oem*.inf files(* represents a number) from the file with thehigher number. Search for the files with thefollowing entry on the second and fourth lines,and then delete them:Extension “.inf” may not appear, depending onthe setting of PC.9 Also delete the oem*.PNF files with the samenumbers as those of the files deleted in step 8.10Disconnect the DVD Video Camera from PC,and then restart the PC.Deleting Other ApplicationsTo uninstall the other applications, use “Control Panel” to open “Add or Remove Applications”, choose theapplications to be uninstalled from the displayed list of applications, and then click the “Change/Remove”.Note :After uninstalling software, be sure to restart the PC.; Panasonic DVD DIGICAM USB DriverInstallation File; Support Model : VDR- M50/70 Series309
