EnglishVQT0K98159MiscellaneousSymptom Cause and Correction ReferencepagePower does not come on,or no operation occurs bypressing button.Execute system reset (press the RESET button). 160Has the DVD Video Camera been subjected to impact?The DVD Video Camera could be damaged. Consult your dealer. The date and time areincorrect.Has the DVD Video Camera been left unused for a long period oftime?The internal backup battery may be discharged:Charge it.38No scene can be deleted. Is the cursor placed on the scene to be deleted?If the selected scene (framed in red) exists, that scene will be deletedeven if you use yellow cursor to select any scene. Check the coloursof cursors and bar graph on the thumbnail screen.91Disc cannot be removed. Did you detach the battery or AC adaptor/charger before setting thepower switch to “OFF”?Connect the battery or AC adaptor/charger, set the power switch to“ ” and then “OFF”, and remove the disc.43, 48DVD Video Cameracannot be operated fromremote control.Is the remote control pointed at the infrared receiver on DVD VideoCamera?Point it at the infrared receiver to operate the DVD Video Camera.35Is the infrared receiver on DVD Video Camera exposed to directsunlight or strong fluorescent light, etc.?The remote control cannot operate the DVD Video Camera whenstrong light strikes the infrared receiver. Adjust the place or angle ofthe DVD Video Camera.35Is there battery in the remote control?Also check the polarities of battery. The battery could be dead: Tryreplacing it.34Is the DVD Video Camera powered?Turn it on. 48Disc cover cannot beclosed.Is disc correctly inserted?Was disc inserted from wrong direction?Remove the disc and then reinsert it.44Is disc inserted in wrong orientation?Remove the disc, and then reinsert it. 44Connect a fully charged battery pack or AC adaptor, and then turnthe DVD Video Camera on. 21Cover will not open. Did you disconnect the battery pack or AC adaptor during removalof disc? Reconnect the battery pack or AC adaptor, and then turn theDVD Video Camera on.40, 43Operating sound is heardcyclically.This sound is heard because the disc is cyclically operated and doesnot indicate a fault. 327
