EnglishVQT0K98981Changing Images for Thumbnails (Edit - Thumbnail)Normally, the first image of the recorded scene is displayed as a thumbnail: You can choose another imageof the scene for thumbnail. If you set a vivid image to thumbnail, you can know what you recorded from aglance at the Disc Navigation screen.1 Press the DISC NAVIGATION button.2 Select the thumbnail of the scene to be changed.3 Press the MENU button.4 Choose “Scene”, “Edit”,“Thumbnail”, and thenpress the A button.5 The “Change Thumbnail”screen will appear: If youare sure you want tochange the thumbnail ofthe selected scene, pressthe A button: Theselected scene will beplayed back.If you want to change the scene whosethumbnail is to be changed, you can change it onthis screen.6 When the image you want to use as thethumbnail of the scene appears, press theSELECT button.7 The screen for verifyingswitching of thumbnail willappear: Choose “YES”,and then press the Abutton.Choose “NO” to cancelswitching of thumbnail.After Yes or No setting, the “Change Thumbnail”screen will be restored.Repeat steps 5-7 to change the other scenes.8 Press the C button to quit.Note :• If you press the MENU button before pressing the Abutton in step 5, the submenu screen will appear (Seepage 97).• A thumbnail of still cannot be changed.• Since the scene to which skipping is set cannot be playedback, you will not be able to change its thumbnail:Release the skip setting of the scene to change thethumbnail.● ● ● ● ● ●Original thumbnail You can use this image as thumbnail.S c e n eRAMENTER RETURNDe l e t eEd i tCopySe l e c tDe t a i lSk i pF ad eComb i neD i v i deT h umbn a i lETCSelect Thumbnail PointENTER C A N C E LS E LENTERCha ng e t h u m bna i l ?Cha ng e Th u m bna i lYES NO266
