EnglishVQT0K9860123Jumping to specified Point (Go To)1 Press the MENU buttonduring playback.2 Choose the option (pointyou want to go to), andthen press the A button.Top : To go to the start, and enter playbackpause.End : To go to the end of last scene, andenter playback pause.Specify : To go to a specified point and enterplayback pause. See the following fordetails.●Specifying the point to view1 Choose “Specify” in step 2 above, and thenpress the A button.The screen for specifying the point to go to willappear.2 Use the joystick to select the desired time ofchosen point.Tilt up : To select the start.Tilt down : To select the end.Tilt to left or right :– Press once: To move the cursor in 10-second units (1-still units forcard)– Hold down: To move the cursor in 1-minute units (10-still unitsfor card)3 Press the A button to enter the selection.The DVD Video Camera will go to the specifiedpoint and enter the playback pause status.To cancel the “Go To” procedure midway, press theC button before going to the specified point.Note :• If multiple scenes are selected using the Disc Navigationfunction or SELECT button, choosing “Top” will jump tothe beginning of selected scenes (P. 119).• When multiple scenes are selected, the total time ofselected scenes will appear in the “total recording time”display.• When card is loaded, the number of stills will appear.• The cursor may not move at same-pitch intervals.Go T oRAMENTER RETURNEn dS p e c i f yT o pGo t oTOP END ENTER CANCELGO TO0 : 00 : 00 0 : 24 : 240 : 03 : 260 : 03 : 26TOP ENDCURRENTPosition of currentlyplayed back imageTotal recording time ofall selected scenesCursorCursor positionGo t oTOP END ENTER CANCELTOPGO TOENDCURRENT0 : 0 0 : 000 : 00 : 00 0 : 24 : 240 : 03 : 26(When the start of scene is selected)Cursor at current image position.Cursor at (GO TO) position.228
