EnglishVQT0K9892Playing Back from Disc Navigation Screen1 Press the DISC NAVIGATION button.2 Use the joystick to select the desired scene.The selected scene will be framed: This is calleda “cursor”.3 Press the A button.Playback will start from the selected scene.Note :Tilting the joystick to left or right will move the cursor tothe preceding or following scene.Tilting it up or down will move to preceding or followingpage.●When playback ends:The DVD Video Camera willenter the playback pausestatus at the last image of lastscene.Pressing the C or DISCNAVIGATION button willrestore the Disc Navigationscreen.When the playback pause status continues for aslong as 5 minutes, the Disc Navigation screen willautomatically be restored.●Playing back stillsA still will be displayed for approx. 3 seconds.When playing back stills on card, playback will stopafter each still playback.Note :• Press the A button to temporarily stop playback.Pressing A again will start from that point.• If you press the A button after playback of the lastscene on disc finishes, playback will start again from thebeginning of disc.• Pressing the C button will always restore the DiscNavigation screen.• With playback on Disc Navigation, you can select desiredscenes for playback and skip unnecessary scenes.• When playing back a still with a large number of pixels oncard, “Playback.” will appear, and it will take some timefor the still to appear.0 01 / 014A l l P r og r a msPLAY RAM0 07 / 014A l l P r og r a msPLAY RAMUp or DownLeft or RightAPlayback pause260
