7. Operation and Maintenance9128-A2-GB20-80 September 2002 7-69Trap Event LogThe Trap Event Log displays all traps stored in the SNMP trap event log. Thefollowing log example describes the alarm conditions that will generate an SNMPtrap for a physical interface, and for the frame relay LMIs and DLCIs. These alarmconditions also generate Health and Status messages seen on theHealth andStatus Messages on page 7-20.Main Menu →Status →Trap Event LogTrap Event Log Screen ExampleUp to 12 trap events can be displayed on a screen, the most current first. Pagedown (PgDn) to view less current trap events. When no trap events have beenlogged, No Events in Log. appears in the Event column.ASCII trap strings used to describe trap events are provided in the tablescontained inStandards Compliance for SNMP Traps in Appendix B,SNMP MIBsand Traps, and RMON Alarm Defaults.main/status/event_log 9128-IIDevice Name: Node A 5/26/2000 23:32TRAP EVENT LOGTotal Trap Events: 535Time ElapsedSince Event Event0d 23:59:59 Change in Frames Discarded due to Inbound Resource Errors on SyncData Port S01P1 frame relay link “Port-1" exceeded threshold of 1by 105.2d 23:59:59 Change in Total LMI Errors on Network T1 frame relay link“Net1-FR1" exceeded threshold of 1 by 59.6d 23:59:59 DLCI 101 of Sync Data Port S01P1 frame relay link “Port-1" up.10d 23:59:59 DLCI 101 of Sync Data Port S01P1 frame relay link “Port-1" down.20d 23:59:59 Primary clock failed.56d 23:59:59 Sync Data Port S01P1 frame relay link “Port-1" LMI down.64d 23:59:59 Network T1 frame relay link “Net1-FR1" LMI down.122d 23:59:59 Network T1 down.364d 23:59:59 Unit reset.--------------------------------------------------------------------------------ESC for previous menu MainMenu ExitRefresh PgUp PgDn
