8. Troubleshooting9128-A2-GB20-80 September 2002 8-21Aborting All TestsUse the Abort All Tests selection from the Test menu to abort all tests running onall interfaces, with exception to DTE-initiated loopbacks. To abort individual teststhat are active, seeStarting and Stopping a Test on page 8-20.ProcedureTo abort all tests on all interfaces:1. Follow this menu selection sequence:Main Menu →Test2. Select Abort All Tests and press Enter.Command Complete appears when all tests on all interfaces have beenstopped.NOTE:Abort All Tests does not interrupt DTE-initiated loopbacks.
