B. SNMP MIBs and Traps, and RMON Alarm Defaults9128-A2-GB20-80 September 2002 B-3System Group (mib-2)This section provides the system object identifier and system description for theSystem Group for the FrameSaver unit, which is an SNMPv1 MIB.FrameSaver Unit’s sysDescr (system 1)The following is the system description (sysDescr [system 1]) for the NMSsubsystem in the FrameSaver unit:PARADYNE T1 FrameSaver SLV; Model:[9126/9126-II/9126-IIR/9128-II]; S/WRelease:(MM.mm.bb [Major.minor.build] format); NAM CCA number:(hardware version in hhhh-hhh format); Serial number:sssssssFrameSaver Unit’s sysObjectID (system 2)The following is the system object identifier (sysObjectID [system 2]), or OID, forthe NMS subsystem in the FrameSaver units:FrameSaver SLV 9126-SLV: 1.3.6.1.4.1.1795.1.14.2.4.4.7FrameSaver SLV 9126-II: 1.3.6.1.4.1.1795.1.14.2.4.4.7.1FrameSaver SLV 9126-IISLV: 1.3.6.1.4.1.1795.1.14.2.4.4.7FrameSaver SLV 9126-IIR: 1.3.6.1.4.1.1795.1.14.2.4.11.4.1FrameSaver SLV 9126-IIRSLV: 1.3.6.1.4.1.1795.1.14.2.4.11.4FrameSaver SLV 9128-II: 1.3.6.1.4.1.1795.1.14.2.4.4.8.1FrameSaver SLV 9128-IISLV: 1.3.6.1.4.1.1795.1.14.2.4.4.8Interfaces Group (mib-2)Clarification for objects in the Interfaces Group, as defined in RFC 1573 andRFC 1213, which is an SNMPv1 MIB, is provided in this section.Paradyne Indexes to the Interface Table (ifTable)The following table provides the ifName for each interface type, the ifDescr, andthe ifIndex that Paradyne has assigned to each.Table B-1. Paradyne Interface Objects Information (1 of 3)ifName Description ifDescr (ifEntry 2) ifIndexPhysical LayerNetwork T1 T1 network interface Network T1; T1 FR NAM;Hardware Version:hhhh-hhh101001001DSX-1 T1 DSX-1 interface DSX-1 T1; T1 FR NAM;Hardware Version:hhhh-hhh101002001Sync Data PortS01P1Synchronous DataPort-1Synchronous Data Port, Slot: 1,Port: 1; T1 FR NAM; HardwareVersion:hhhh-hhh101003001
