B. SNMP MIBs and Traps, and RMON Alarm DefaultsB-20 September 2002 9128-A2-GB20-80Frame Relay Link Alarm DefaultsThese alarms apply to the FrameSaver unit’s frame relay link interfaces. They arecreated during RMON initialization.Table B-11. Frame Relay Link Alarm Defaults (1 of 2)ItemSampleType 1 MIB/Tag/OID 2 IntervalEventTypeRisingThresholdDefaultFallingThresholdDefaultInvalid Frames DMIB: pdn_FrExt.mib (E)Tag: devFrExtLinkRxIlFramesOID: .1.3.6.1.4.1.1795.2.24.2.6.9.4.7.1.18.I900 secs(15 mins)Rising 1 1Short Frames DMIB: pdn_FrExt.mib (E)Tag: devFrExtLinkRxShortOID: .1.3.6.1.4.1.1795.2.24.2.6.9.4.7.1.6.I900 secs(15 mins)Rising 1 1Long Frames DMIB: pdn_FrExt.mib (E)Tag: devFrExtLinkRxLongOID: .1.3.6.1.4.1.1795.2.24.2.6.9.4.7.1.7.I900 secs(15 mins)Rising 1 1Rx Discards DMIB: pdn_FrExt.mib (E)Tag: devFrExtLinkRxDiscardsOID: .1.3.6.1.4.1.1795.2.24.2.6.9.4.7.1.15.I900 secs(15 mins)Rising 1 1Tx Discards DMIB: pdn_FrExt.mib (E)Tag: devFrExtLinkTxDiscardsOID: .1.3.6.1.4.1.1795.2.24.2.6.9.4.7.1.14.I900 secs(15 mins)Rising 1 1Rx TotalErrorsDMIB: pdn_FrExt.mib (E)Tag: devFrExtLinkTotRxErrsOID: .1.3.6.1.4.1.1795.2.24.2.6.9.4.7.1.20.I900 secs(15 mins)Rising 1 11 D = Delta. Indicates that the calculated difference between the current value and the previous value iscontained in the MIB.2 I in the OID = Interface ID of the frame relay link.
