iDSL Port Details window 143Models 2616RC, 3096RC & 3196RC Admin Reference Guide 10 • iDSL (Model 3196RC)- localLoopBack(4)- remoteLoopBack(5)- dataMode(6)- lineDown(7)- lineLoopback(8)- testPattern(9)• Activation State (idslActivationState)—The operating software for each iDSL port includes a module calledthe Activation State Manager (ASM). The Activation State Info table provides information about the cur-rent software state for the port. The current values of the following iDSL port parameters are shown in dis-play-only format:- deactivate(0)- activate(1)• Hardware (idslHardwareFail)—Indicates the current overall state of the iDSL port hardware, i.e. the pres-ence or absence of a hardware error condition. One of the following values will be displayed:- failed(1)- operational(0)Note The Near End Performance window which provides a record of errorscounted on this port during the last 24 hours in 15-minute intervals(see section “iDSL Near End Performance Interval” on page 145 formore information).iDSL Port Statistics tableThe iDSL Port Statistics table displays the current values of the following iDSL port statistics variables:• Link Up-Time (idslUpTimer)—Total Length of time in days:hours:minutes:seconds since the link state forthis port last changed to up. This value is reset when the link goes down.• Near End CRC Errors (idslNebeCounter)—Near end CRC error counter.• Far End CRC (idslFebeCounter)—Far end CRC error counter• Link Drops (FLAPs)(idslFlapCounter)—Total number of times the iDSL Port flap (disconnected) since thecounter was last reset.• Port Up-Time (idslCurrentSecond)—The current seconds in the current interval that the iDSL Port hasbeen up.• Test Pattern Errors (idslPatternErrors)—The total cumulative number of test pattern errors detected onthis port since the counter was last reset.• Errored Seconds (idslErrSecond)—The total cumulative number of seconds in which there were one ormore errors on this port since the counter was last reset.• Severely Errored Seconds (idslSevErrSecond)—The total cumulative number of seconds in which therewere one or more CRC errors on this port since the counter was last reset.
