Ethernet Status table 253Models 2616RC, 3096RC & 3196RC Admin Reference Guide 17 • System• Primary clock. A flashing red star (see figure 137 on page 252) indicates there is an alarm condition in theprimary clock. A green square denotes that the primary clock is functioning properly.• Fallback clock. A flashing red star (see figure 137 on page 252) indicates there is an alarm condition in thefallback clock. A green square denotes that the fallback clock is functioning properly.Ethernet Status tableThe Ethernet Status section of the System Status Overview window (see figure 138) displays the speed andalarm/no-alarm condition for each of the T-DAC’s three Ethernet ports.Figure 138. Ethernet statusThe three ports are the front panel Ethernet port and the two internal ports (2.16 Port 1 and 2.16 Port 2)which can be routed through the rear blade to the cPCI chassis mid-plane.• Link—A green square (see figure 137 on page 252) denotes that no alarms are present and parameter isfunctioning properly. A red flashing star indicates that an alarm condition exists.• Speed—Displays 100 Mbps or 10 Mbps, depending on how the port is configuredTable 6. System status/subsystem referenceItem RecommendedAlarm Chapter 8, “Alarms” on page 57Board Temp. Chapter 8, “Alarms” on page 57Power Supply Chapter 8, “Alarms” on page 57Primary Clock Chapter 8, “Alarms” on page 57 and chapter 10, “System Clocking” on page 83Fallback Clock
