System Log Configuration window 280Models 2616RC, 3096RC & 3196RC Admin Reference Guide 19 • System Log• syslogFlashFull(1)—When Flash is rejecting system log messages because the message cache is full, the T-DAC will set the value of syslogFlashClear(2) to syslogFlashFull(1). To correct this condition by erasing themessages in (clearing) flash memory, select the value syslogFlashClear(2) from the drop-down menu, andclick the (submit query) button.• syslogFlashClear(2)—When you set the value of syslogFlashClear to syslogFlashClear(2) and click the (sub-mit query) button, the T-DAC will erase all system log messages stored in Flash.System Log Configuration windowThe System Log Configuration window (see figure 156) provides the means for you to view and modify the val-ues of System Log parameters. The parameters define displays SysLog and SNMP Trap Daemon IP Addresslocations, message priorities for the offered SysLog message destinations, and other priority and maintenanceinformation. To display the System Log Configuration window, on the System Log Overview window, click theModify… link.Figure 156. System Log Configuration windowThe following sections describe the System Log Configuration window parameters.Note When you are finished modifying the parameters, click the Modifybutton to apply the changes.DaemonsThis portion of the System Log Configuration window displays the parameters that define the IP address for theSysLog Daemon and the IP address for the SNMP Trap Daemon.
