System Log Overview window 277Models 2616RC, 3096RC & 3196RC Admin Reference Guide 19 • System Log• Non-Volatile Memory—Clicking on the Non-Volatile Memory… link displays the System Log Messages inNon-Volatile Memory window where you can view the system log messages currently stored in the T-DACNVRAM. The System Log Messages in Non-Volatile Memory window is described in section “System LogMessages in Non-Volatile Memory window” on page 284.Figure 155. Parameters section of the System Log Overview windowSystem Log ParametersThe following sections describe the System Log Parameters section of the System Log Overview window (seefigure 155).SysLog Daemon IP Address(syslogDaemonIP)The IP address of a host computer system which is running a syslog daemon. System messages with a prioritygreater than or equal to the configurable syslogDaemonPriority will be sent to this IP address (see section “Pri-ority” on page 281).SNMP Trap Daemon IP Address (syslogTrapIP)The IP address of a host system which is running a SNMP trap daemon. SNMP Trap messages with a prioritygreater than or equal to the configurable syslogTrapPriority will be sent to this IP address.Min Priority for SysLog Daemon (syslogDaemonPriority)System messages which have a priority equal to or greater than this setting will be sent to the syslog daemondefined by the SysLog Daemon IP Address (syslogDaemonIP).• priorityVerbose(5)• priorityDebug(10)• priorityInfo(20)• priorityOddity(40)• priorityService(60)• prioritySystem(80)• priorityDisable(1000)
