Philips 32PFK5500 User Manual

Also see for 5500 series: Quick start guide User manual Quick start guide Quick start guide Operating manual

5Switching On andOff5.1On or standbyMake sure the TV is connected to the mains ACpower. Connect the supplied power cord to the ACin connector at the back of the TV. The indicator lightat the bottom of the TV lights up.Switch onPress  on the remote control to switch the TVon. Alternatively, press  HOME. You can alsopress the small joystick key on the back of the TV toswitch the TV on in case you can't find the remotecontrol or its batteries are empty.Switch to standbyTo switch the TV to standby, press  on the remotecontrol. You can also press the small joystick key onthe back of the TV.In standby mode, the TV is still connected to themains power but consumes very little energy.To switch off the TV completely, disconnect thepower plug.When disconnecting the power plug, always pull thepower plug, never the cord. Ensure that you have fullaccess to the power plug, power cord and outletsocket at all times.5.2Keys on TVIf you lost the remote control or its batteries areempty, you can still do some basic TV operations.To open the basic menu…1 - With the TV switched on, press the joystick key onthe back of the TV to bring up the basic menu.2 - Press left or right to select  Volume, Channel or  Sources. Select  Demo, to start ademo movie.3 - Press up or down to adjust the volume or tune tothe next or previous channel. Press up or down to gothrough the list of sources, including the tunerselection. Press the joystick key to start the demomovie.4 - The menu will disappear automatically.To switch the TV on standby, select  and press thejoystick key.5.3Sleep TimerWith the Sleep Timer, you can set the TV to switch toStandby automatically after a preset time.To set the Sleep Timer…1 - Press , select Sleep Timer and press OK.2 - With the slider bar you can set the time to up to180 minutes in increments of 5 minutes. If set to 0minutes, the Sleep Timer is switched off. You canalways switch off your TV earlier or reset the timeduring the countdown.3 - Press  BACK to close the menu.5.4Switch Off TimerIf the TV receives a TV signal but you don't press akey on the remote control during a 4 hour period, theTV switches off automatically to save energy. Also, ifthe TV does not receive a TV signal nor a remotecontrol command for 10 minutes, the TV switches offautomatically.If you use the TV as a monitor or use a digital receiverto watch TV (a Set-Top Box - STB) and you do notuse the remote control of the TV, you shoulddeactivate this automatic switch off.To deactivate the Switch Off Timer …1 - Press , select All Settings and press OK.2 - Select Eco Settings and press  (right) to enterthe menu.3 - Select Switch Off Timer and press OK.4 - Press the arrows  (up) or  (down) to adjustthe value. The value 0 deactivates the automaticswitch off.5 - Press  (left) repeatedly if necessary, to closethe menu.For more information on environmentally friendly TVsettings, in Help, press the colourkey  Keywords and look up Eco Settings.25