Philips 32PFK5500 User Manual

Also see for 5500 series: Quick start guide User manual Quick start guide Quick start guide Operating manual

7Channels7.1Install ChannelsFor more information, in Help, press the colourkey  Keywords and look up Channel, SatelliteInstallation.7.2Channel ListsAbout Channel ListsAfter a channel installation, all channels appear onthe channel list. Channels are shown with their nameand logo if this information is available.For each type of tuner - Antenna/Cable (DVB-T/C) orSatellite (DVB-S) - there is a channel list with allinstalled channels. You can only filter this list to showTV or only Radio channels. Or when you have severalsatellites installed, you can filter the channels persatellite.With a channel list selected, press thearrows  (up) or  (down) to select a channel,then press OK to watch the selected channel. Youonly tune to the channels in that list whenusing   or   keys.Channel iconsAfter an Automatic Channel Update of the channellist, newly found channels are marked witha  (star).If you lock a channel, it will be marked witha  (lock).The 3 most popular channels being watched byothers at this moment are marked with a 1, 2 or 3.Radio stationsIf digital broadcasting is available, digital radiostations are installed during installation. Switch to aradio channel just like you switch to a TV channel. ACable (DVB-C) channel installation usually placesradio stations from channel number 1001 onwards.* This TV can receive digital television standard DVB .TV may not work properly with some operators ofdigital television , non-compliance with requirementsof the standard in full.Open a Channel ListNext to the list with all channels for each tuner,Antenna/Cable or Satellite tuner, you can select afiltered list or you can select one of the favourite listsyou created.To open the current channel list…1 - Press , to switch to TV.2 - Press OK to open the current channel list.3 - Press  BACK to close the channel list.To select one of the channel lists…1 - With a channel list open on screen,press  OPTIONS.2 - Select Select Channel List and press OK.3 - In the list menu, select one of the availablechannel lists and press OK.Alternatively, you can select the list name at the topof the channel list and press OK to open the listmenu.TipYou can easily switch between the two tuners inthe Sources menu.Press  SOURCES and select Watch TV to switchto the Antenna/Cable tuner. Select WatchSatellite to switch to the satellite tuner.The TV will always open the last selected channel listfor the selected tuner.Filter a Channel ListYou can filter a list with all channels. You can set thechannel list to show only TV channels or only Radiostations. For Antenna/Cable channels you can set thelist to show the Free-to-Air or the Scrambledchannels. When you have several satellites installed,you can filter the satellite channel list per satellite.To set a filter on a list with all channels…1 - Press .2 - Press OK to open the current channel list.3 - Press  OPTIONS.4 - Select Select Channel List and press OK.5 - Select Filter Antenna Channels, Filter CableChannels or Filter Satellite Channels according tothe list you want to filter.6 - In the Options menu, select the filter you wantand press OK to activate. The name of the filterappears as part of the channel list name on top of thechannel list.7 - Press  (left) to go back one step or press  toclose the menu.29