Philips 32PFK5500 User Manual

Also see for 5500 series: Quick start guide User manual Quick start guide Quick start guide Operating manual

24Channel Installation24.1Antenna/Cable InstallationUpdate ChannelsAutomatic Channel UpdateIf you receive digital channels, you can set the TV toautomatically update these channels.Once a day, at 6 AM, the TV updates the channelsand stores new channels. New channels are stored inthe Channels List and are marked with a  .Channels without a signal are removed. The TV mustbe in standby to automatically update channels. Youcan switch off Auromatic Channel Update.To switch off the automatic update…1 - Press , select All Settings and press OK.2 - Select Channels > Antenna/CableInstallation and press OK.3 - Enter your PIN code if necessary.4 - Select Automatic Channel Update andpress OK.5 - Select Off and press OK.6 - Press  BACK to close the menu.When new channels are found or if channels areupdated or removed, a message is shown at TV startup. To avoid this message to appear after everychannel update, you can switch it off.To switch off the message…1 - Press , select All Settings and press OK.2 - Select Channels > Antenna/CableInstallation and press OK.3 - Enter your PIN code if necessary.4 - Select Channel Update Message and press OK.5 - Select Off and press OK.6 - Press  BACK to close the menu.In certain countries, the Automatic channel update isdone while watching TV or on any moment when theTV is in standby.Manual Channel UpdateYou can always start an channel update yourself.To start a channel update manually…1 - Press , select All Settings and press OK.2 - Select Channels > Antenna/CableInstallation and press OK.3 - Enter your PIN code if necessary.4 - Select Search for Channels and press OK.5 - Select Start and press OK.6 - Select Update Digital Channels,select Next and press OK.7 - Select Start and press OK to update the digitalchannels. This can take a few minutes.8 - Press  BACK to close the menu.Reinstall ChannelsReinstall All ChannelsYou can reinstall all channels and leave all other TVsettings untouched.If a PIN code is set, you will need to enter this codebefore you can reinstall channels.To reinstall channels…1 - Press , select All Settings and press OK.2 - Select Channels > Antenna/CableInstallation and press OK.3 - Enter your PIN code if necessary.4 - Select Search for Channels and press OK.5 - Select Start and press OK.6 - Select Reinstall Channels, select Next andpress OK.7 - Select the country where you are now andpress OK.8 - Select Next and press OK.9 - Select the type of installation you want, Antenna(DVB-T) or Cable (DVB-C) and press OK.8 - Select Next and press OK.11 - Select the type of channels you want, Digitaland Analogue Channels or Only DigitalChannels and press OK.8 - Select Next and press OK.13 - Select Start and press OK to update thedigital channels. This can take a few minutes.14 - Press  BACK to close the menu.Reinstall TVYou can redo a full TV installation. The TV iscompletely reinstalled.To redo a full TV installation…1 - Press , select All Settings and press OK.2 - Select General Settings > Reinstall TV andpress OK.3 - Enter your PIN code if necessary.4 - Select Yes and press OK to confirm.5 - The TV will reinstall completely. All settings willbe reset and installed channels will be replaced. Theinstallation can take a few minutes.6 - Press  BACK to close the menu.77