Philips 32PFK5500 User Manual

Also see for 5500 series: Quick start guide User manual Quick start guide Quick start guide Operating manual

the menu.MPEG Artefact ReductionWith MPEG Artefact Reduction, you can smoothenthe digital transitions in the picture. MPEG artefactsare mostly visible as small blocks or jagged edges inimages.To reduce the MPEG artefacts…1 - Press , select All Settings and press OK.2 - Select Picture and press  (right) to enter themenu.3 - Select Advanced > Sharpness > MPEGArtefact Reduction, and press  (right) to enter themenu.4 - Select Maximum, Medium, Minimum or Off.5 - Press  (left) repeatedly if necessary, to closethe menu.Picture FormatBasicIf the picture is not filling the whole screen, if blackbars are showing on the top or bottom or at bothsides, you can adjust the picture to fill the screencompletely.To select one of the basic settings to fill the screen…1 - While watching a TV channel, press .2 - Select Picture Format > Fill Screen or Fit toScreen, and press OK.3 - Press  (left) repeatedly if necessary, to closethe menu.• Fill Screen – automatically enlarges the picture tofill the screen. Picture distortion is minimal, subtitlesremain visible. Not suitable for PC input. Someextreme picture formats can still show black bars.• Fit to Screen – automatically zooms in the pictureto fill the screen without distortion. Black bars may bevisible. Not suitable for PC input.AdvancedIf the two basic settings are inadequate to format thepicture you want, you can use the advanced settings.With the advanced settings you manually format thepicture on your screen.You can zoom, stretch and shift the picture until itshows what you need – e.g. missing subtitles orscrolling text banners. If you format the picture for aspecific Source – like a connected game console –you can return to this setting the next time you usethe game console. The TV stores the last setting youdid for each connection.To format the picture manually…1 - While watching a TV channel, press .2 - Select Advanced and press OK.3 - Use Shift, Zoom, Stretch or Original to adjustthe picture. Select Undo to return to the setting thepicture had when you opened Picture Format.• Shift – Select on the arrows to shift the picture. Youcan only shift the picture when it is zoomed in.• Zoom – Select on the arrows to zoom in.• Stretch – Select on the arrows to stretch thepicture vertically or horizontally.• Undo – Select to return to the picture format youstarted with.• Original – Shows the original format of theincoming picture. This is a 1:1 pixel on pixel format.Expert mode for HD and PC input.Quick Picture SettingDuring the first installation, you did some picturesettings in a few easy steps. You can redo these stepswith Quick Picture Setting. To do these steps, makesure the TV can tune to a TV channel or can show aprogramme from a connected device.To set the picture in a few easy steps…1 - Press , select All Settings and press OK.2 - Select Picture and press  (right) to enter themenu.3 - Select Advanced > Quick Picture Setting, andpress OK.4 - Select Start.5 - Select the picture setting you prefer and go to thenext setting.6 - Finally select Finish.7 - Press  (left) repeatedly if necessary, to closethe menu.21.2SoundSound StyleSelect a StyleFor easy sound adjustment, you can select a presetsetting with Sound Style.1 - While watching a TV channel, press .2 - Select Sound and press  (right) to enter themenu.3 - Select Sound Style, and select one of the stylesin the list.4 - Press  (left) repeatedly if necessary, to closethe menu.The available styles are…64