2–Driver Installation and ConfigurationVMware Driver Installation and Configuration30 BK3254601-00 CInstalling QConvergeConsole VMware vSphere Web ClientPlug-in1. Gather the information necessary for the installation, including: IP address of the vCenter Server vCenter Server credentials (user name and password) Where to host the QConvergeConsole VMware vSphere Web ClientPlug-in (on vCenter Server or other server)If you are hosting the QConvergeConsole VMware vSphere WebClient Plug-in on a non-vCenter Server, make sure the server hasTomcat running as a service and have the IP address of the Tomcatinstance ready. Also, make sure the Tomcat CATALINA_HOMEenvironment variable is set to the appropriate directory.2. Run the installer on the server providing the Tomcat service. Provide theinformation requested by the installer. On Windows, double-click the installer and follow the instructions onthe GUI provided. On Linux:a. Make sure the user is the root user (or has root privileges).b. Create the installer executable if one does not already exist.Choose the installer for your system (32-bit or 64-bit), and thenissue the following command:chmod +x Where <installer> is the file name of the installer.c. Run the installer by issuing the following command:./Where is the file name of the installer.d. Follow the instructions provided by the installer.3. Restart the Tomcat service.NOTEFor more details on vihostupdate, see the vSphere Command-LineInterface Installation and Reference Guide, located here:http://www.vmware.com/pdf/vsphere4/r40/vsp_40_vcli.pdf
