3–Fibre Channel ConfigurationSetting an FA-PWWN63 BK3254601-00 C14. Click Back to return to the Main Configuration Page window.15. Click Finish to save your changes and exit.Setting an FA-PWWNThis section provides the following information for fabric-assigned port world wide(FA-PWWN) name: Setting the FA-PWWN from the Adapter Setting the FA-PWWN from the Brocade SwitchSetting the FA-PWWN from the AdapterFrom the adapter side, you can set the FA-PWWN using the following utilities: Setting FA-PWWN with QConvergeConsole GUI Setting FA-PWWN with QConvergeConsole CLI Setting FA-PWWN with QConvergeConsole VMware Plug-insPort Down Retry Count Specifies the number of seconds the software retriesa command to a port returning port-down status. Therange is 0 to 255.Link Down Timeout Specifies the number of milliseconds the Fibre Chan-nel uplink port can be offline before the system isnotified that the SAN fabric connectivity is lost andthe uplink port is marked as being down. The rangeis 1 to 255000.Table 3-7. HBA Configuration Page Settings (Continued)Setting Description
