3–Fibre Channel ConfigurationConfiguring CS_CTL QoS82 BK3254601-00 CEnabling CS_CTL QoS Mode for the Initiator and Target PortsFigure 3-33 shows how to enable CS_CTL QoS mode for the initiator and targetports.Figure 3-33. Enabling CS_CTL QoS ModeVerifying and Confirming CS_CTL Mode Setup for Each PortFigure 3-34 shows how to verify the CS_CTL mode setup for each port.Figure 3-34. CS_CTL Mode Setup for Each PortCreating a Virtual Port from the Adapter’s Port inQConvergeConsole GUITo create a virtual port in QConvergeConsole GUI:1. In the QConvergeConsole GUI content pane on the left, select the Host tab.2. On the Host page, expand the adapter node, and then select a port.3. In the content pane on the right, select the Virtual tab.4. On the Virtual page under Create New Virtual Port, specify the Number ofvPort to create, and then click Update.5. Click Create.
