3–Fibre Channel ConfigurationSetting Fibre Channel Adapter Parameters43 BK3254601-00 CSetting Fibre Channel Adapter ParametersUse QConvergeConsole to set Fibre Channel adapter parameters: Setting Fibre Channel Adapter Parameters with QConvergeConsole GUI Setting Fibre Channel Adapter Parameters with InteractiveQConvergeConsole CLI Setting Fibre Channel Adapter Parameters with NoninteractiveQConvergeConsole CLISetting Fibre Channel Adapter Parameters withQConvergeConsole GUIFor information about how to set Fibre Channel adapter parameters usingQConvergeConsole GUI, refer to the topic about managing Fibre Channel andFibre Channel over Ethernet (FCoE) adapter ports in the QConvergeConsoleHelp.Setting Fibre Channel Adapter Parameters with InteractiveQConvergeConsole CLITo set Fibre Channel adapter parameters with interactiveQConvergeConsole CLI:1. On the Fibre Channel Adapter Configuration menu, select HBAParameters.2. On the port menu, select a port to open the HBA Parameters menu.3. On the HBA Parameters menu, select the Configure HBA Parametersoption to open the Configure Parameters menu.For more information, refer to the section about the Fibre Channel interactivecommands in the User’s Guide—QConvergeConsole CLI (part numberSN0054667-00).Setting Fibre Channel Adapter Parameters withNoninteractive QConvergeConsole CLIFor information about how to set Fibre Channel adapter parameters using thenoninteractive mode of QConvergeConsole CLI, refer to the section about theFibre Channel noninteractive commands in the User’sGuide—QConvergeConsole CLI (part number SN0054667-00).
