3–Fibre Channel ConfigurationRunning Diagnostics—Fibre Channel Ping and Trace Route77 BK3254601-00 CSupported configurations for Fibre Channel ping and trace route include: QLogic 2700 Series Adapters Brocade Switches with Based Fabric OS® (FOS) v6.0.0aRunning a Fibre Channel CT Ping TestYou can run a Fibre Channel CT ping test from QConvergeConsole GUI,QConvergeConsole CLI, or the QConvergeConsole VMware plug-ins, asdescribed in this section.Running a Fibre Channel CT Ping from QConvergeConsole GUITo run a Fibre Channel CT ping test from QConvergeConsole GUI:1. In the QConvergeConsole GUI left pane, click the Host tab.2. On the Host page, expand the adapter node and then select a port.3. In the content pane on the right, click the Diagnostics tab.4. On the Diagnostics page, click the General Diagnostics tab.NOTEThe switch and the Fibre Channel end device must both support the FibreChannel ping and trace route feature. See Table 3-10 on page 93 for thesupported Fibre Channel software version.
