3–Fibre Channel ConfigurationUsing a Fabric-Assigned Boot LUN75 BK3254601-00 CUsing a Fabric-Assigned Boot LUN with QConvergeConsolePlug-insFor information about using a fabric-assigned boot LUN for QConvergeConsoleVMware vSphere Web Client Plug-in, see the section “Configure Fibre ChannelPort Boot Parameters” in the User’s Guide—QConvergeConsole Plug-ins forVMware vSphere (part number SN0054677-00).To configure a 2700 Series Adapter boot device with QConvergeConsoleVMware vCenter Server Plug-in:1. In the QConvergeConsole VMware vCenter Server Plug-in, click theQConvergeConsole tab.2. In the tree pane on the left, select a 2700 Series Adapter port.3. Click the Boot tab.4. On the Boot Device Selection page, select the Enable Fabric AssignedBoot LUN check box. Figure 3-29 shows an example.Figure 3-29. Fabric-Assigned Boot LUN in QConvergeConsole VMware vCenterServer Plug-inFor details, refer to the “Boot Device Selection” topic in QConvergeConsoleHelp.
