3–Fibre Channel ConfigurationUsing Fast!UTIL for Custom Configuration39 BK3254601-00 CSelectable Boot SettingsThe Configuration Settings menu provides access to the Selectable BootSettings options. If you enable the Host Bus Adapter BIOS in the adaptersettings, you can select the boot device, as shown in Table 3-2.The Selectable Boot Settings option allows you to specify up to four WWPNs orLUNs as boot devices.To enable the Selectable Boot option and insert devices into boot devicelocations:1. On the Configuration Settings menu, select Host Adapter Settings.2. Enable the Host Bus Adapter BIOS and then press the ESC key to returnto the Configuration Settings menu.3. On the Configuration Settings menu, select Selectable Boot Settings.4. To enable or disable (toggle) the Selectable Boot option, press the ENTERkey. To move to the Primary location of the Selectable Boot List menu,press the DOWN ARROW key.5. To see a list of accessible devices (in the Select Fibre Channel Devicemenu), press ENTER.6. Select a drive by pressing the UP ARROW and DOWN ARROW keys or thePAGE UP and PAGE DOWN keys to scroll to the device that you want to putinto your Selectable Boot menu list. Then press ENTER to select therequested device and load it into the Selectable Boot menu list.Table 3-2. Selectable Boot SettingsEnableSelectableBootBootWWPN/LUNDevice BootNo — The BIOS configures the first disk drive it finds as the bootdevice.Yes NonespecifiedThe BIOS configures the first disk drive it finds that is alsoLUN 0 as the boot device.Yes Specified The BIOS scans through the specified boot worldwide portname (WWPN) and LUN list until it finds a disk drive. Thisdrive is configured as the boot device.
