Quorum Q150T S Instruction Manual
                                                                                            | |
Contents
| 
Q150T Sample Preparation System10473 - Issue 5 26 Q150T - Instruction Manual4.3.1 Creating a New MaterialTo create a new material:1. Select Edit | Materials from the menu bar. Material Editor is displayed (seeFigure 4-5).2. Tap on Materials at the root of the material ‘tree’.3. Tap on the New button. The New Material dialog box is displayed.4. Enter a name for the profile: tap in the Name field to display the on-screenkeyboard (Figure 4-6) in the Enter Name dialog box.5. Tap on the OK button to confirm the changes to the material. Alternatively, tap onthe Cancel button to close the dialog box without creating a new material.6. The new material is created using the default settings for the chosen process type.7. Now refer to the Editing Material Parameters section.4.3.2 Editing Material ParametersEach material is defined by the parameters shown in Table 4:Table 4 Material parametersName DefaultValueMinimumValueMaximumValueCommentDensity 10 1 30Material Type oxidising noble oxidisingSputter Current 50 1 150Clean Current 150 100 150Material Tool 0.1 10Sputter cleaningmode*Timed Specifies how the material will becleaned. Options are:TimedContinuous sputter for fix time.Pulse aboveCycle plasma until target voltageis above that specified inSputter stop cleaning atPulse belowCycle plasma until target voltageis below that specified inSputter stop cleaning atOnly used during pulse cleaningof target.Sputter stopcleaning at (Volts)*250 90 600 Target voltage that needs to beachieved before cleaning iscompleted and the coating starts.Only used during pulse cleaningof target.* Displayed for information only. Changes if required will need to be carried out by a Quorumagent. |
Related manuals for Quorum Q150T E
manualsdatabase
Your AI-powered manual search engine