Radio Shack 20-106 User Manual

Also see for PRO-106: User guide Firmware upgrade guide Service manual Quick start guide

Contents

26Scanner Setup27Scanner SetupDelaySometimes, several seconds can pass betweentransmissions. To avoid missing a reply, a delay isautomatically set for each channel. The scannerstops for 2 seconds after a transmission stopsbefore it resumes scanning or searching.To turn the delay on or off:Press FUNC •/Delay when the scanner stops on atransmission. Lowercase d in the display indicatesdelay is off. Uppercase D indicates delay is on.Note: Delay and delay time can also be set ineach Scannable Object Menu. Search Delay timecan be set in the Global menu. Refer to “AppendixB: Detailed Menu Reference” on page 102 for adescription of delay settings.Adjusting the LCD ContrastYou can set the LCD contrast from level 1 to 7.1. Press PGM for Program Mode.2. Press GLOB softkey to access Global menu.3. Press S or T to scroll CONTRAST.4. Press W or X to select contrast level 1 to 7.5. Press SAVE softkey to save new setting.Turning the Key Tone On or OffEach time you press any of the scanner’s keys, thescanner beeps.To turn the scanner’s key tone on or off:1. Press PGM for Program Mode.2. Press GLOB softkey to access Global menu.3. Press S or T to scroll Key Beeps.4. Press X to select On or Off.5. Press SAVE softkey to save new setting.Turning Key and Backlight On or Off1. Press PGM for Program Mode.2. Press GLOB softkey to access Global menu.3. Press S or T to scroll to Light Mode.4. Press X to select backlight operation.Norml (Normal): Uses the backlight key onkeypad.Key: Key backlight activates when key ispressed.Ignore: Backlight turns on when any keyis pressed, and the key’s normal function isignored.On: Backlight remains on at all time.Stlth (Stealth): Disables backlight5. Press S or T to scroll to Light Area.6. Press X to select area to light when backlightis on.Both: LCD and keypad lights.LCD: Only LCD Lights.Keybd: Only keypad lights.7. Press S or T to scroll to Light Secs toselect the time backlight remains on forNormal, Key and Ignore light modes.8. Press X to and enter 1 to 99 seconds.9. Press SAVE softkey to save new settings.