Radio Shack 20-106 User Manual

Also see for PRO-106: User guide Firmware upgrade guide Service manual Quick start guide

Contents

44Organizing Objects45Organizing ObjectsExisting Objects1. Press PGM to put scanner in Program Mode.2. Press S, T, W or X to scroll to the objectyou want to change.3. Press EDIT softkey.4. Press CURR softkey to edit the current object.5. Scroll down to Scan Lists:6. Press X to scroll through the Scan Lists.7. Press SEL to select On or Off for the desiredscan list item. The asterisk (*) next to the ScanList number indicates that the object is amember of that Scan List.8. Press Save softkey to save change.Naming Scan Lists1. Press PGM to put scanner in Program Mode.2. Press GLOB softkey.3. Press S or T to scroll to Scan Lists:.4. Press SEL.5. Press X to edit the settings for the selectedScan List.6. Press S or T to scroll to Tag:, then press X.7. Use the number keys to enter a name. See“Appendix C: Text Entry and QuickText”Appendix C: Text Entry and QuickText” on page125 for information on entering text.8. Press Done softkey when finished.9. Press Save softkey to save changes to theGlobal menu.Enabling or Disabling Scan ListsWhile ScanningScan List 1-10Press the number keys that corresponds with theScan List you want to select.For example, pressing 4 while scanning willtoggle the state of Scan List 04 from enabled todisabled, or vice versa if the Scan List is alreadydisabled.Scan List 11-20Press FUNC, then press a number key, i.e., pressFUNC 3 to toggle the status of Scan List 13.Note: If you enable a Scan List that has noassigned objects, the number for that ScanList will flash in the display while the scanner isscanning.From Global Settings Menu1. Press PGM to enter Program Mode.2. Press GLOB softkey.3. Press S or T to scroll to Scan Lists: andpress SEL.4. Press S or T to scroll to the Scan List youwish to change then press SEL.5. Press X to scroll to Enabled: and pressW or X to select On or Off.The asterisk (*) indicates Scan List enabled.6. Press the Save softkey to save settings.7. Press Save softkey again to confirm globalchanges and exit GLOB menu.