Radio Shack 20-106 User Manual

Also see for PRO-106: User guide Firmware upgrade guide Service manual Quick start guide

Contents

54Organizing Objects55Object Searchescreates a new TGRP object in the radio’s memory,then locks that TRGP object out, so that thenext time it appears on the system, the radio willignore any traffic on that TGRP.To lockout an undesired wildcard hit:When the scanner stops on an undesiredtalkgroup, press the TGL/O softkey.To unlock or edit talkgroups locked out usingthe wildcard lockout feature:1. Press PGM to enter Program Mode.2. Press S, T, W or X to select a locked outtalkgroup.3. Press FUNC, then L/OUT to removepermanent lockout from the talkgroup.or Press FUNC, then CL to delete the TGRPobject from the scanner.or Press the EDIT, then the CURR softkey to editand save the TGRP object.Object SearchesA powerful feature of your PRO-106 is the ability todefine different types of frequency searches andprocess them while scanning. Frequency searchesare just another type of Scannable Object in thehierarchy of the radio’s memory organization, so theycan be manipulated and scanned in the same manneras conventional channels and trunking talkgroups.Limit Search Object (LMIT)A Limit Search Object (LMIT) is a search objectthat stores the parameters necessary for the radioto search each frequency within a lower and anupper limit for activity. A LMIT object can be usedfor standalone searching—the radio just searchesand stops when activity is detected on a frequency,or for searching that is performed while the radiois scanning. The radio treats LMIT objects just likeany other Scannable Object when in Scan Mode.When used in Scan Mode, this capability is bestsuited for small ranges of frequencies that containmore frequencies than practical to program asindividual channels. Any size range can be used,but larger ranges that take more time to searchwill increase the chances of missed activity onother object types.Essential ParametersFrLo: Lower frequency limits to begin search.FrHi: Upper frequency limits to end search.Mode: By default the scanner will automaticallychoose the receive mode that most likely appliesto the active frequency as the search proceeds.Tag: (Recommended) Name your LMIT so youcan easily find or identify it later.