Radio Shack 20-106 User Manual

Also see for PRO-106: User guide Firmware upgrade guide Service manual Quick start guide

Contents

86Additional Information87Additional InformationPower-On Configuration Key SequencesPower-on keypress sequences are used asshortcuts to configuration items, like attenuatorsettings, backlight settings and memoryinformation. Power-on key sequences are alsoused to place your scanner into firmware upgrademode for CPU and DSP firmware upgrades.The following table lists the power-on keysequences available in the PRO-106. Unlessotherwise specified, each sequence is invoked bypressing and releasing each key in sequence, oneat a time. The first key must be pressed while theWelcome/Owner screen is being displayed:Key Sequence Function1 Shortcut to PGM>GLOB>Sound Mode2 Shortcut to PGM>GLOB>Key Beeps3 Displays Boot, CPU and DSP versionsLIGHT Shortcut to PGM>GLOB>Light ModeATT Shortcut to PGM>GLOB>Atten Mode0, 0 Shortcut to PGM>GLOB>Memory Info0, 1 Destructive, clears working memoryand resets all Global settings to factorydefaults. Does not affect V-Scanners.0, 2 Destructive, resets all Global settings tofactory defaults. Does not affect workingmemory or V-Scanners.0, 5 Destructive, executes EEPROM memorytest, then clears working memory andresets all Global settings to factorydefaults. Does not affect V-Scanners.0, CL Erases DSP APP Upgrade code, restoresfactory DSP version0, PGM Places radio in DSP APP firmwareupgrade modeHold PGM whilepowering onradioPlaces radio in CPU firmware upgrademodePower-On PasswordSetting a power-on password can prevent anyoneother than you from using this scanner.To set the power-on password1. Press PGM to enter Program Mode.2. Press GLOB softkey.3. Scroll to Set password, then press SEL key.4. The confirmation menu for the power-onpassword setting appears. Press YES softkey.5. Enter the four-character (four-digit)password. You can enter the characters usingalphanumeric text entry method. When youhave finished entering characters, press OKsoftkey to save the entry.Note: You can cancel the entry by pressingCancl softkey.To operate your scanner with power-onpassword:1. Turn VOLUME clockwise to turn power on.2. After the Welcome message is displayed, thescanner prompts you to enter the password.3. Enter your password.4. If you entered the correct password, you willbe able to operate your scanner. If you haveentered the wrong password, the scannerwill generate error beep. Try entering yourpassword again.To disable the power-on password1. Press PGM to enter Program Mode.2. Press GLOB softkey.