WinLink™ 1000 User Manual Release 1.9 G-1Appendix GAIND AlignmentUse this procedure when installing the Al- indoor system WinLink™ 1000-ANID or manually aligning two WinLink™ 1000 units.To achieve the best results, use the Llink Budget Calculator from the Win-Link™ 1000 installation, and then align the antennas so that they exactlyface each other.To achieve the best performance, the line of sight must be as clear as possi-ble with no obstructions between the two sites.Prior to attempting alignment, install the hardware and software in accor-dance with this User Manual. The figure below shows the link setup. At leasttwo people are needed to perform the alignment procedures.Once the alignment is complete, you will be able to evaluate the quality ofthe link.Figure G-1: WinLink™ 1000 Link SetupExpected Signal Level for AIND radiosUse the Link Budget Calculator utility supplied on the RADWIN ManagerSoftware CD-ROM to calculate the expected performance of the WinLink™1000™ wireless link. The utility allows you to determine the RSS of the linkand number of E1/T1 services available at a specified distance. In all-indoor
