BRS Link Configuration Appendix IWinLink™ 1000 User Manual Release 1.9 I-3BRS Link ConfigurationThe BRS link is reconfigured during the Link Installation or the Link Configu-ration wizards, or from the Air Interface screen.¾To Configure BRS Channel Settings:1. Set the Band Plan.2. Select the Bandwidth required,• Single Band• Double Band3. Select the Frequency from the pull-down menu.4. Click Next. The system is re-synchronized to the changes.Figure I-4: BRS Channel Settings Post-TransitionNoteBoth sites in a BRS Link must be configured identically.Any changes to the frequency settings cause the link to re-synchronize. A short loss of service will occur during re-synchronization.
