Getting Started with the RADWIN Manager Chapter 4WinLink™ 1000 User Manual Release 1.9 4-22. Choose Install RADWIN Manager and follow the on-screen instructionsof the installation wizard to complete the setup of the RADWIN Managerapplication.If the installation program fails to start, browse to your CD/DVD drive,chose the setup.exe program and run it.Getting Started with the RADWIN ManagerIf your links are within easy reach, you can configure them using the proce-dure described below. If however, your links are to be geographically scat-tered, it may be convenient to pre-load each ODU with its network addressprior to physical installation. The procedure is quite straight forward, andset out in Appendix D.¾To start the RADWIN Manager:1. Connect the managing computer to one of the two LAN ports as shown inFigure 4-1 below:Figure 4-1: LAN ports on the front panel of the IDU-CNoteEach ODU requires a static IP address, since part of the link definition is theIP address pair of both ODUs. Network Managers should ensure that theseaddresses are outside of the automatic allocation ranges used by theirnetwork DHCP server.
