Changing the Log-On Password Chapter 4WinLink™ 1000 User Manual Release 1.9 4-8Changing the Log-On Password¾To change the log on password:1. From the Tools menu, select Change Password.The Change Password dialog box appears.2. Enter the current password, and the new password.3. Click OK to confirm.First stepsAt this point the main window of the RADWIN Manager should be displayed:ToolsSoftwareUpgrade Upgrades the ODU firmware in selected links Appendix FSpectrum View Not available for WinLink™ 1000ChangePassword Change the log-on password page 4-8Events LogClear Events Clear local events logpage 9-16Save to File Save events log data to a filePreferences Set managing computer preferencesHelpRADWINManager Help View online help version of the User ManualLink BudgetCalculator Calculator opened in default browser Appendix BGet DiagnosticsInformation Obtain system information page 9-1About RADWINManager RADWIN Manager build informationNoteFor what follows, it is assumed that you have set the IP addresses of bothODUs. For the purposes of illustration, we will use the following IPaddresses:Our managing computer has its NIC set to IP address 192.168.2.100. Thelog-on ODU is set to IP address 192.168.2.101 and the over-the-air ODU isset to 192.168.2.102. The Subnet Mask for both sites is 255.255.255.0 andthe Default Gateway is left unset. We will maintain this arrangementthroughout the remainder of this manual.Table 4-3: RADWIN Manager: Offline Functionality (Continued)Menu levelFunction ReferenceTop +1 +2
