Installation Chapter 5WinLink™ 1000 User Manual Release 1.9 5-6Follow the instructions to use the Alternative Link Password, and click OKto finish. You are returned to the window in Figure 5-3 above. Continuewith the next step.3. Enter a new password.4. Retype the new password in the Confirm field.5. Click OK.6. Click Yes when asked if you want to change the link password.7. Click OK at thePassword changed success message.Step 3, Channel SettingsWinLink™ 1000 systems have a feature called Automatic Channel Selection(ACS). In the event of sync loss, ACS chooses the first available channel in alist of monitored channels nominated in the Channel settings window ofFigure 5-5 below. A channel switch takes place sufficiently fast as toensure no loss of service.Figure 5-5: Channel Settings - Automatic Channel SelectionThe default frequency for the product is shown.Note• Restoring Factory Defaults returns the Link Password towireless-bridge.• If the link is inactive, then the link password may also be changedfrom the Site Configuration dialogs. See page 8-12.
