Supported Variables from the RFC 1213 MIB Appendix QWinLink™ 1000 User Manual Release 1.9 Q-4required on both sides of the link, it is recommended that you change bothsides of the link first and then perform the action.Supported Variables from the RFC 1213 MIBTable Q-1: Supported RFC 1213 VariablesName OID TypeAccessDescriptionifIndex .1.3.6.1.2.1.2.2.1.1.x aa. x is the interface IDInteger RO A unique value for each interface.Its value rangesbetween 1 and the value of ifNumber.The value foreach interface must remain constant at least fromone re-initialization of the entity's networkmanagement system to the next re-initialization.ifDescr .1.3.6.1.2.1.2.2.1.2 DisplayString RO A textual string containing information about theinterface.This string should include the name ofthe manufacturer, the product name and theversion of the hardware interface.ifType .1.3.6.1.2.1.2.2.1.3 Integer RO The type of interface, distinguished according tothe physical/link protocol(s) immediately `below'the network layer in the protocol stack.ifSpeed .1.3.6.1.2.1.2.2.1.5 Gauge RO An estimate of the interface's current bandwidth inbits per second.For interfaces which do not vary inbandwidth or for those where no accurateestimation can be made, this object should ontainthe nominal bandwidth.ifPhysAddress .1.3.6.1.2.1.2.2.1.6 Phys-Address RO The interface's address at the protocol layerimmediately `below' the network layer in theprotocol stack. For interfaces which do not havesuch an address (e.g., a serial line), this objectshould contain an octet string of zero length.ifAdminStatus .1.3.6.1.2.1.2.2.1.7 Integer RW The desired state of the interface. The testing(3)state indicates that no operational packets can bepassed.ifOperStatus .1.3.6.1.2.1.2.2.1.8 Integer RO The current operational state of the interface. Thetesting(3) state indicates that no operationalpackets can be passed.ifInOctets .1.3.6.1.2.1.2.2.1.10.x Counter RO The total number of octets received on theinterface, including framing characters.ifInUcastPkts .1.3.6.1.2.1.2.2.1.11.x Counter RO The number of subnetwork-unicast packetsdelivered to a higher-layer protocol.ifInNUcastPkts .1.3.6.1.2.1.2.2.1.12.x Counter RO The number of non-unicast (i.e., subnetwork-broadcast or subnetwork-multicast) packetsdelivered to a higher-layer protocol.ifInErrors .1.3.6.1.2.1.2.2.1.14.x Counter RO The number of inbound packets that containederrors preventing them from being deliverable to ahigher-layer protocol.ifOutOctets .1.3.6.1.2.1.2.2.1.16.x Counter RO The total number of octets transmitted out of theinterface, including framing characters.ifOutUcastPkts .1.3.6.1.2.1.2.2.1.17.x Counter RO The total number of packets that higher-levelprotocols requested be transmitted to asubnetwork-unicast address, including those thatwere discarded or not sent.ifOutNUcastPkts .1.3.6.1.2.1.2.2.1.18.x Counter RO The total number of packets that higher-levelprotocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast orsubnetwork-multicast) address, including thosethat were discarded or not sent.
