MIB Traps Appendix QWinLink™ 1000 User Manual Release 1.9 Q-18MIB TrapsGeneralEach ODU can be configured with up to 10 different trap destinations. Whenthe link is operational, each ODU sends traps originating from both Site Aand Site B.The source IP address of the trap is the sending ODU. The trap originatorcan be identified by the trap Community string or by the trap descriptiontext.Each trap contains a trap description and additional relevant informationsuch as alarm severity, interface index, time stamp and additional parame-ters. See Table Q-3 for additional information.winlink1000IduTdmLineStatusStr 1.3.6.1.4.1.4458.1000.2.6.20 DisplayString RO Line status.winlink1000IduTdmHotStandbySupport 1.3.6.1.4.1.4458.1000.2.6.21 Integer RO Indicates if Hot Standby is supported.winlink1000IduTdmDesiredHotStandbyMode1.3.6.1.4.1.4458.1000.2.6.22 Integer RW Desired Hot Standby Mode.winlink1000IduTdmHotStandbyOperationStatus1.3.6.1.4.1.4458.1000.2.6.23 Integer RO The Link Actual Status.winlink1000IduTdmBackupLinkConfigurationRW The current configuration of the backup link.winlink1000GeneralTrapDescription 1.3.6.1.4.1.4458.1000.100.1 DisplayString RO Trap's Description. Used for Trap parameters.winlink1000GeneralTrapSeverity 1.3.6.1.4.1.4458.1000.100.2 Integer RO Trap's Severity. Used for Trap parameters.winlink1000GeneralCookie 1.3.6.1.4.1.4458.1000.100.3 DisplayString RW Reserved for the Manager application providedwith the productwinlink1000GeneralEcChangesCounter 1.3.6.1.4.1.4458.1000.100.4 Integer ROTable Q-2: Private MIB Parameters (Sheet 14 of 14)Name OID TypeAccessDescription
