Chapter 6: USB Profiles108USB profile Description USB bus speed limited tofull-speed (12 MBit/s) Virtual CD-ROM and disk drivescannot be used simultaneouslyWARNING: USB enumeration willtrigger whenever virtual media isconnected or disconnected.Use Full Speed for VirtualMedia CIMUse Full Speed for virtual media CIMThis profile resembles the behavior ofthe original KX2 release with FullSpeed for virtual media CIM optionchecked. Useful for BIOS that cannothandle High Speed USB devices.Restrictions: USB bus speed limited tofull-speed (12 MBit/s)Selecting Profiles for a KVM PortThe KX II comes with a set of USB profiles that you can assign to a KVMport based on the characteristics of the KVM target server it connects to.You assign USB profiles to a KVM port in the Device Settings > PortConfiguration > Port page in either the KX II Remote or Local Console.It is the administrator that designates the profiles that are most likely tobe needed for a specific target. These profiles are then available forselection via MPC, AKC and VKC. If a profile has not been madeavailable, you can access any of the available profiles by selecting USBProfile > Other Profiles.Assigning USB profiles to a KVM port makes those profiles available to auser when connected to a KVM target server. If required, the user canselect a USB profile from the USB Profile menu in VKC, AKC or MPC.For information about assigning USB profiles to a KVM port, seeConfiguring USB Profiles (Port Page) (on page 187).
