Chapter 8: Device Management187Configuring USB Profiles (Port Page)You choose the available USB profiles for a port in the Select USBProfiles for Port section of the Port page. The USB profiles chosen in thePort page become the profiles available to the user in VKC whenconnecting to a KVM target server from the port. The default is theWindows 2000® operating system, Windows XP® operating system,Windows Vista® operating system profile. For information about USBprofiles, see USB Profiles (on page 101).Note: To set USB profiles for a port, you must have a VM-CIM or DualVM-CIM connected with firmware compatible with the current firmwareversion of the KX II. See Upgrading CIMs (on page 217).The profiles available to assign to a port appear in the Available list onthe left. The profiles selected for use with a port appear in the Selectedlist on the right. When you select a profile in either list, a description ofthe profile and its use appears in the Profile Description field.In addition to selecting a set of profiles to make available for a KVM port,you can also specify the preferred profile for the port and apply thesettings set for one port other KVM ports.Note: See Mouse Modes when Using the Mac OS-X USB Profile witha DCIM-VUSB (on page 109) for information on using the Mac OS-X®USB profile if you are using a DCIM-VUSB or DCIM-DVUSB.To open the Port page:1. Choose Device Settings > Port Configuration. The Port Configurationpage opens.2. Click the Port Name for the KVM port you want to edit. The Portpage opens.To select the USB profiles for a KVM port:1. In the Select USB Profiles for Port section, select one or more USBprofiles from the Available list. Shift-Click and drag to select several continuous profiles.
