Chapter 3: Working with Target Servers54Disconnecting KVM Target ServersNote: This item is not available on the KX II Local Console. The only wayto disconnect from the switched target in the Local Console is to use thehot key.To disconnect a target server:1. Click the port name of the target you want to disconnect. The PortAction menu appears.2. Choose Disconnect.Tip: You can also close the Virtual KVM Client window by selectingConnection > Exit from the Virtual KVM menu.Choosing USB ProfilesWhen you connect to a KVM target server for the first time, as describedin Connecting to a KVM Target Server (on page 51), the preferredUSB profile for the port is automatically used. If you have connected tothe target server previously using a different profile, the USB profile fromthe last connection is used. You are alerted to the use of a profile otherthan the preferred profile by a warning similar to the following:After you have connected to a target server, you can change the USBprofile as necessary. By default, the profiles that appear under the USBProfile menu in the VKC are those that you are most likely to use. Theseprofiles have been preselected by the administrator for use with theconnected target server, based on your operational requirements.However, all profiles are available to be selected via the Other Profilesoption on the USB Profile menu.To choose a USB profile:1. Connect to a KVM target server as described in Connecting to aKVM Target Server (on page 51).2. In VKC, choose a USB profile from the USB Profile menu.The name of the profile indicates the operating system or server withwhich it should be used. See USB Profiles (on page 101) for detailson USB profiles.
